Direct Image by Geoprobe

Fisch Environmental Direct Image Service

Dave Fisch
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
399 Sheri's Place
Valley Springs CA 95252
Ph: 800.637.4563
Fx: 209.772.3571

MIP Qualifications:

Fisch Environmental has been performing Direct push Services for over 10 years and since 2000 direct imaging services. Fisch Environmental currently has the following capabilities:

• Electrical conductivity (wenner probe)
• Cone Penetration Testing w/piezo (CPTU)
• Membrane Interface Probe w/ Conductivity (MIP/EC)
• Membrane Interface Probe w/CPT (MIP/CPT)

Fisch Environmental employs a variety of Detectors with our MIP system, including ECD, PID, and FID. We can deploy MIP system using percussion Geoprobes or in the CPT/MIP Static push mode. All of our fieldwork can be completed with our own Geoprobe Equipment or because of our unique setup we can hookup to other direct push equipment and large cone trucks. Fisch Environmental has found the MIP to be a powerful engineering tool for site remediation. Targeting specific zones for treatment has made all the difference in time to closure. Once you see the correlated output you'll understand, MIP is like Lays potato chips you can't do just one.

Method of MIP Deployment:

Static and Dynamic

Special Capabilities:

MIP/CPT and MIP/EC

Number of MIP Systems Operating:

1

Fisch Environmental's 6600/PC111,
and MIP using dynamic push.
 
 
 
 

The MIP is deployed from a trailer where all
the GC components can be kept safe, clean &
dry. This Dynamic Push went 65 ft. After field
review of MIP/CPT data, we determined potential
water Bearing zones and performed a pneumatic
slug test and sampled at each zone.

With the MIP Unit being independent from any
vehicle, it can easily be combined with other
types of equipment.

The trailer can be maneuvered into tight
locations and can be worked out of the
front or the back.

Typical Cross Section output of EC logging.

Typical Cross Section output of MIP logging with PID and FID Detectors.

Real Time field output of MIP detectors ECD (black) and PID (blue).